JANTY PLUS STARTER KIT
Set contains the following:
- 1 x 650 mAh Auto Battery
- 1 x Internal Micro USB Cable
- 2 x Replaceable Closed Tank Cartridges
To enjoy fast charging time, use the micro USB cable with a 1 Amp 5V USB Adaptor (adaptor not included).
The Janty Plus is covered by our 90-day Warranty Program. Cartridges are warranted to be working on arrival, please verify and let us know immediately if you find any defects.
Use only for intended purposes. Changes or modifications not expressly approved by Janty could void the user's authority to operate the equipment.
Janty is not responsible for any damage or personal injury caused by inappropriate, incorrect, or irresponsible use of the products.
Introducing the new Janty Plus e-cigarette! Its Automatic Temperature Control lends it with an intelligent dry-wick and short-wick detection mechanism that helps prevent dry hits and overheating. With a fast charging capability and replaceable cartridge system, the Janty PLUS is designed to give you a vaping experience that is unparalleled in consistency and convenience!
Includes 2 x cartridges pre-filled with our premium Janty Select Blend e-liquid.
Our e-liquid range has a nicotine content between 2.5% to 3.5%
- Automatic Temperature Control for consistent vaping
- Intelligent dry wick detection ensures minimal dry hits
- Closed tank replaceable cartridge system for your convenience
- Food-grade Copolyester tank
- 304 Grade Stainless Steel
- Automatic Vaping
- 650 mAh rechargeable automatic battery
- Fast charging - get fully charged in less than an hour
- Easy 1-button operation (Power/Mode)
- 5 RGB full spectrum micro LEDs indicates:
- Battery/Charging status
- Coil status (Short coil/Dry wick)
- Power indication
This product contains nicotine. Nicotine is an addictive chemical.
- Dimensions: 15 mm x 150 mm
- Battery Capacity: 650 mAh
- Charging Time: 45 (fast) - 90 mins
For fast charging, use the cable provided with a 1.0 Amp 5V USB Adaptor (not supplied).
HOW TO PLACE THE CARTRIDGE:
Use only Janty Plus cartridges with your device. Take a new cartridge and pull out the silicon cover at the bottom.
- Step 1. Insert the cartridge inside the system.
- Step 2. Turn lightly until it aligns and falls through.
- Step 4. Holding the mouthpiece part, turn the cartridge clockwise by 90 degrees until you hear it click in place.
After installing a new cartridge, please wait for about 10-20 seconds before vaping to give the wick some time to absorb the e-liquid.
HOW TO CHARGE THE BATTERY
Connect the Micro USB Cable to the device and then plug it to either a USB port or wall adaptor outlet. For faster charging, use a 1 Amp 5V USB Adaptor (not supplied).
IMPORTANT: Unplug the device from the charger before vaping.
HOW TO USE
How to Power ON/OFF
To turn on or off, press the power button (located at the bottom of the device) for 2 seconds.
START UP SEQUENCE
After turning on the device, the LED lights will light up from the centre going towards the outer sides and continue flashing this way 2 times. After one second, the LED lights will indicate battery status.
Short-pressing on/off button will indicate battery status after 2 seconds.
After each draw, the LED lights will indicate the battery status automatically.
HOW TO VAPE
Inhale slowly through the mouthpiece to activate the battery and enjoy the smooth, delicious taste.
RECHARGING THE BATTERY
Charge the device when the battery gets down to 25%.
BATTERY STATUS LED INDICATORS
(During charging, LED indicators will be the same colors as above but they will be flashing to indicate charging status.)
HOW TO REMOVE THE CARTRIDGE
You will get noticeably less flavor and vapor when your cartridge is nearly empty. A warning LED protocol (see "Coil Status LED Indicator" section) will prompt you when the cartridge needs replacing.
- Step 1. Hold the mouthpiece and turn it counter-clockwise to disengage.
- Step 2. Simply pull out to dislodge, then discard the used cartridge responsibly.
COIL STATUS LED INDICATOR
Dry wick detection:
A dry wick happens when the cartridge is newly installed and needs time to absorb the e-liquid, or when the e-liquid inside the cartridge runs empty. You would not be able to vape the device when the wick is dry.
Janty Plus's Automatic Temperature Control mechanism will automatically regulate the temperature of the heating element. Whenever a dry wick is detected, it will be indicated by showing red LED lights going from 5 (red) on, 4 on, 3 on, 2 on to 1 on within a one-second interval.
Short Coil Detection:
A short coil happens when the coil is not giving enough resistance. Whenever a short coil is detected, 5 red flashing LED lights (at half-second intervals in between) will show for a period of 3 seconds.
When a short coil is detected, the device will cease to function and you will not be able to vape. Simply replace the cartridge.
Store your Janty Plus away from the reach of children, pets, or flames (avoid any place with high temperatures).
Always keep it clean and dry.
Dispose used cartridges promptly and away from the reach of children or pets.
The Janty Plus comes with a Lithium-ion rechargeable battery. Please recycle or dispose according to your state or local waste management laws. Do not dispose in any way that could expose this product and its components to fire, flame, pressure (e.g., trash compactor), children or pets.
SAFETY & PRECAUTIONS
- Use only compatible chargers. For faster charging, the cable must be used with a 1 Amp 5V USB Adaptor.
- Always be present when charging your battery. Charge only on noncombustible surface.
- If the battery becomes hot even without use or shows any other abnormalities, disconnect the battery then leave it on a safe, fire-proof surface for an hour before handling again for proper disposal.
- Keep the battery away from high temperature and avoid impact. Handle with care.
- Keep electronic cigarettes, all components and accessories out of reach of children and pets.
This product contains nicotine. Nicotine is an addictive chemical.
This product should not be used by minors, non-smokers, women who are pregnant or breast-feeding, or persons with or risk of heart disease, high blood pressure, diabetes, or taking medicine for depression or asthma.
This product is not a smoking cessation product and is not intended as such.
This product is not intended to diagnose, treat, cure, or mitigate any disease or condition. If the non-vaporized concentrated ingredients are ingested, seek medical attention immediately.
To lessen the risk of injury, avoid using your Janty Plus device or components if they look damaged or broken, appear to be malfunctioning become wet, or if they feel hotter than usual.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.